· Design for indoor installation · Protections:Short circuit/Overload/Over voltage · Forced air cooling by built-in DC ball bearing fan · 100% full load burn-in test · Suitable for LED lighting · Products passed CE, RoHS certification · 3 years warranty
- Product Description
Model DY-60W-12-N DY-60W-24-N OUTPUT DC voltage 12V±5% 24V±5% Rated current 5A 2.5A Current range 0-5A 0-2.5A DC output power 60W 60W Ripple &Noise (max) note.2 350mV 350mV Load stability 1% 1% Voltage tolerance note.3 ±0.5% ±0.5% Setup, Rise time note.4 220v,40ms 220v,40ms Hold up time(Typ.) 20ms 20ms INPUT Voltage range 200-240V AC Frequency range 50-60Hz AC current(Typ.) 4.2A 240V Inrush current Cold start ≤40A Incoming line stability ±0.5% Power factor(Typ.) PF≧0.6 Efficiency (Typ.) >86% >86% Leakage current ≤3.5mA/240VAC PROTECTION Short circuit The power supply can resume normal operation when the short circuit is removed during power supply. Overload 105%-200% rated output power Protection type:Hiccup mode,recovers automatically after fault condition is removed Over current After the over current fault is removed, the power supply will automatically resume normal operation. Over voltage When the output voltage exceeds the rated voltage, the power supply will be protected and normal operation can be resumed after the fault is removed. ENVIRONMEN Working temp. -25℃ to 40℃,Full load, Normal operation Working humidity 5%(0℃)~90%(40℃)RH,72Hrs,Full load, Normal operating Storage temp., humidity -30℃ to 80℃ Temp. coefficient ±0.03%℃(0-5℃) Vibration 5~9Hz,A=1.5mm. / 9~200Hz,Acceleration 5m/S2 SAFETY&EMC Aging test Input voltage : 220V 50HZ Rated output current 25℃, Burn-in 2h Withstand voltage Input and output: 3KVAC 5mA 3s input and shell; 1.5KVAC 5mA 3s Isolating resistance Between input and output, input and shell: 500VDC / 10MΩ EMC emission Compliance to EN55032(CISPR32)Class B.EN61000-3-2,-3,EAC TP TC 020 EMC immunity Compliance to EN61000-4-188.8.131.52.6.8.11.EN55024,light industry level,criteria A,EAC TP TC 020 Safety standards Design by IEC60950 standard NOTE All parameters NOT specially mentioned are measured at 240VAC input,rated load and 25℃ of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor. Tolerance: includes set up tolerance. Line regulation and load regulation. Length of set up time is measured at first cold start .Turning ON/OFF the power supply may lead to increase of the set up time.
Dimension 149x53x22(mm) Carton quantity 120pcs/Carton Carton size 550x330x200(mm) Net Weight 0.11kg/pcs Total Weight 14.5kg