undefined

undefined

Products

DY-100W-12-T
DY-100W-12-T
DY-100W-12-T
DY-100W-12-T
DY-100W-12-T
DY-100W-12-T
DY-100W-12-T
DY-100W-12-T

DY-100W-12-T

· Design for indoor installation · Protections:Short circuit/Overload/Over voltage · Forced air cooling by built-in DC ball bearing fan · 100% full load burn-in test · Suitable for LED lighting · Products passed CE, RoHS certification · 3 years warranty

在线询价
联系我们

产品详情

Model DY-100W-12-N DY-100W-24-N
OUTPUT DC voltage 12V±5% 24V±5%
Rated current 8.3A 4.16A
Current range 0-8.3A 0-4.16A 
DC output power 100W 100W
Ripple &Noise (max) note.2 350mV 350mV
Load stability 1% 1%
Voltage tolerance  note.3 ±0.5% ±0.5%
Setup, Rise time   note.4 220v,40ms 220v,40ms
 Hold up time(Typ.) 20ms 20ms
INPUT Voltage range 200-240V AC
Frequency range 50-60Hz
AC current(Typ.) 4.2A 240V
Inrush current Cold start ≤40A
Incoming line stability ±0.5%
Power factor(Typ.) PF≧0.6
Efficiency  (Typ.) >86% >86%
Leakage current ≤3.5mA/240VAC
PROTECTION Short circuit   The power supply can resume normal operation when the short circuit is removed during power supply.
Overload 105%-200% rated output power
Protection type:Hiccup mode,recovers automatically after fault condition is removed
Over current After the over current fault is removed, the power supply will automatically resume normal operation.
Over voltage   When the output voltage exceeds the rated voltage, the power supply will be protected and normal operation can be resumed after the fault is removed.
ENVIRONMEN Working temp.    -25℃ to 40℃,Full load, Normal operation
Working humidity 5%(0℃)~90%(40℃)RH,72Hrs,Full load, Normal operating
Storage temp., humidity -30℃ to 80℃
Temp. coefficient ±0.03%℃(0-5℃)
Vibration 5~9Hz,A=1.5mm. / 9~200Hz,Acceleration 5m/S2
SAFETY&EMC Aging test Input voltage : 220V 50HZ   Rated output current 25℃,  Burn-in 2h
Withstand voltage Input and output: 3KVAC 5mA 3s input and shell; 1.5KVAC 5mA 3s
Isolating resistance Between input and output, input and shell: 500VDC / 10MΩ
EMC emission Compliance to EN55032(CISPR32)Class B.EN61000-3-2,-3,EAC TP TC 020
EMC immunity Compliance to EN61000-4-2.3.4.5.6.8.11.EN55024,light industry level,criteria A,EAC TP TC 020
Safety standards  Design by IEC60950 standard
NOTE All parameters NOT specially mentioned are measured at 240VAC input,rated load and 25℃ of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf &47uf parallel  capacitor.
Tolerance: includes set up tolerance. Line regulation and load regulation.
Length of set up time is measured at first cold start .Turning ON/OFF the power supply may lead to increase of the set up time.

 

 

 

Others

Dimension 175x53x22(mm)
Carton quantity 100pcs/Carton
Carton size 550x330x200(mm)
Net Weight 0.13kg/pcs
Total Weight 14.12kg