DY-500W-24-B

Features： • Design for indoor installation • Protections:Short circuit/Overload/Over voltage • Forced air cooling by built-in DC ball bearing fan • 100% full load burn-in test • Suitable for LED lighting • Products passed CE, RoHS certification • 3 years warranty

Product Category:

B Series

500W B series LED Switch power supply.pdf

Message

Back to list

Product Description

Features：
• Design for indoor installation
• Protections:Short circuit/Overload/Over voltage
• Forced air cooling by built-in DC ball bearing fan
• 100% full load burn-in test
• Suitable for LED lighting
• Products passed CE, RoHS certification
• 3 years warranty

SPECIFECATION
Model		DY-500W-12-B	DY-500W-24-B
OUTPUT	DC voltage	12V±5%	12V±5%
	Rated current	41.6A	20.8A
	Current range	0-41.6A	0-20.8A
	DC output power	500W	500W
	Ripple &Noise(max)note.2	<280mV	<280mV
	Load stability	1%	1%
	Voltage tolerance note.3	±5%	±5%
	Setup, Rise time note.4	200MS,50MS	200MS,50MS
	Hold up time(Typ.)	20MS	20MS
INPUT	Voltage range	178-250VAC
	Frequency range	50-60Hz
	AC current(Typ.)	4A 230v
	Inrush current	Cold start ≤40A
	Incoming line stability	士0.5%
	Power factor(Typ.)	PF≥0.6
	Efficiency (Typ.)	>87.9%	>91.9%
	Leakage current	5A/230VAC
PROTECTION	Short circuit	The power supply can resume normal operation whenthe short circuit is removed during power supply.
	overload	105%-200% rated output power
		Protection type:Hiccup mode,recovers automaticallyafter fault condition is removed
	over current	After the over current fault is removed, the power supplywill automatically resume normal operation.
	over voltage	when the output voltage exceeds the rated voltage, thepower supply will be protected and normal operationcan be resumed after the fault is removed.
ENVIRONMEN	Working temp.	-10°℃~+50°C( Refer to "derating curve”)
	Working humidity	-20~+45℃ 20%~90%RH
	Storage temp., humidity	-40°℃~85℃ 10%~95%RH
	Temp. coefficient	士0.03%°C(O-5C)
	Vibration	10-500Hz,2G 10min./ 1 cycle,60 min. each axes
SAFETY&EMC	Aging test	Input voltage : 220V 50HZ Rated output current 25℃,Burn-in 2hl
	Withstand voltage	Input and output: AC2.5KV 5mA 6os input and shell;AC2KV 5mA 60S
	Isolating resistance	Between input and output,input and shell: 500VDC /10OMQ
	EMC emission	Compliance to EN55032(CISPR32)Class B.EN61000-3-2,-3,EAC TP TC 020
	EMC immunity	Compliance to EN61000-4-2.3.4.5.6.8.11.EN55024,lightindustry level,criteria A,EAC TP TC 020
	Safety standards	UL62368-1,TUV EN62368-1.EAC TP TCO04 approved
NOTE	All parameters NOT specially mentioned are measured at 230VAC input,rated loadand 25℃ of ambient temperature.
	Ripple & noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf &47uf parallel capacitor.
	Tolerance: includes set up tolerance.Line regulation and load regulation.
	Length of set up time is measured at first cold start .Turning ON/OFF the powersupply may lead to increase of the set up time.